can't you see the sunshine….

Feathering the Nest

When I tell the story about moving back to the US from Italy, one of the things that people always realize and comment on is “Oh, I guess you had to buy a car.”  A few folks will say “Oh, and furniture too.”  I guess the others think that we moved furniture…. Well we didn’t.  And we didn’t store that much.  Fortunately, our condo is so small we don’t need much.

From our experience where we rented I knew we needed a piece of furniture that could act as counterspace in the kitchen and table space for meals.   We looked online at free-standing islands, tables with storage, just about every configuration/name we could think of.  To me most of them looked exactly like what would be seen in any American kitchen.  I just couldn’t cope.  The only one I came close to liking was at Williams and Sonoma and was custom-built.  And they custom built the price too.  Then I hoped to get some one to build one for us but gave up on that idea too.  So good old DIY was the answer.

DSCF3007 (2)

Capital City Lumber to the rescue.  And these really cool moulded plastic forms.


These forms allow someone to build shelves with straight cuts, no angles, no need to ‘toenail’ which can be hard if you don’t have a lot of DYI skills.  When we moved in, our friend Pat put this together for me.  As a temporary measure we used a door on top.

DSCF3001 (2)

When Wayne (the man who made my Murphy Bed) came over to talk about the bed I realized he was probably just the man to make the table top.  So we talked about it.  And he agreed.  When he delivered the bed, he took away the table base.  For a few weeks our door/table balanced on top of big plastic tubs and we got by.  I was very excited when Wayne returned with the table top.

DSCF3005 (2)

Wayne followed the measurements that I wanted.  The table is 5′ by 4′.  The counter top part, what we use most of the time is almost 3′.  He had just the hinges to mount the other part which is now a leaf that folds down.  And is down most of the time.

DSCF3006 (2)

Here’s what it looks like open.  We can comfortably seat 6.  8 in a pinch.  So the first weekend in November we had Pat (the clever man who put it together in the first place) and Debby over for ‘Duckappaloosa!’.   And the table worked very well.

I am ready now to declare the ground floor more or less done.  We have all the pieces of furniture that we need down here.  Pictures are hung.  The tops of two pieces of furniture are covered with things.  A few hours of focus and channeling Marie Kondo will fix that.  There are some projects that still need to be done.  They have always been on the ‘winter projects’ schedule.  I’ll get to them.  In a few weeks I’ll try to get to a before and after post.  We are very lucky that it has turned out so well.

Leave a comment »

Sleeping with sharks under the stars

The majority of the furniture that we stored for 10 years was storage pieces.  Some that I had bought and four bookcases that had been my parents.  My father had gotten the school book cases from the Louisville Public Schools.  Before I left their home, he and I refinished one and I used it as a china cabinet for many years.  The others had been in their house.  When I closed their house, I moved those three up to Virginia.  And then into storage in North Carolina.  And then out of storage.  Two went upstairs (a real treat to move up the steps) and have clothes and pictures.  Two remained down.  The former china cabinet has become my pantry.  And this one has become a Murphy Bed.


DSCF3007 (2)

From Wikipedia, the free encyclopedia
Murphy bed (in North America), also called a wall bedpull down bed, or fold-down bed, is a bed that is hinged at one end to store vertically against the wall, or inside of a closet or cabinet.


The bed is named for William Lawrence Murphy (1876–May 23, 1957), who applied for his first patents around 1900. According to legend, he was wooing an opera singer, but living in a one-room apartment in San Francisco, and the moral code of the time frowned upon a woman entering a man’s bedroom. Murphy’s invention converted his bedroom into a parlor, enabling him to entertain.[1] Earlier foldup beds had existed, and were even available through the Sears, Roebuck & Co. catalog,[2] but Murphy introduced pivot and counterbalanced designs for which he received a series of patents, including one for a “Disappearing Bed” on June 18, 1912[3] and another for a “Design for a Bed” on June 27, 1916.[4]

Murphy beds are used for space-saving purposes, much like trundle beds, and are popular where floor space is limited, such as small homes, apartments, hotels, mobile homes and college dormitories. In recent years, Murphy bed units have included options such as lighting, storage cabinets, and office components. They have seen a resurgence in popularity in the early 2010s due to the weak economy, with children moving back in with their parents and families choosing to renovate homes rather than purchasing larger ones.[5]

In 1989, the United States Court of Appeals for the Second Circuit ruled that the term “Murphy Bed” had entered common usage so thoroughly that it was no longer eligible for trademark protection.[6]

Designs and models

Most Murphy beds do not have box springs. Instead, the mattress usually lies on a wood platform or wire mesh and is held in place so as not to sag when in a closed position. The mattress is attached to the bed frame, often with elastic straps to hold the mattress in position when the unit is folded upright. Piston-lifts or torsion springs make modern Murphy beds easy to lower and raise.

Since the first model several other variations and designs have been created, including: sideways-mounted Murphy beds, Murphy bunk beds, and solutions that include other functions. Murphy beds with tables or desks that fold down when the bed is folded up are popular, and there are also models with sofas[7] and shelving solutions.[8]


When attempting to pull a Murphy bed down from the wall, if not installed properly, it is possible that it could collapse on the operator. In 1982, a drunk man suffocated inside a closed Murphy bed,[9] and two women were entrapped and suffocated by an improperly installed wall bed in 2005.[10]

In popular culture

Murphy beds were a common setup for comic scenes in early cinema, including in silent films. Among the films which use Murphy beds as comic props are Charlie Chaplin‘s 1916 One AM, several Three Stooges shorts, It’s a Mad, Mad, Mad, Mad World, the James Bond film You Only Live TwiceMel Brooks‘s Silent MovieThe Pink Panther Strikes AgainThe Great Muppet Caper, and in Who Framed Roger Rabbit.

It’s also used as a gag in the Tintin album Red Rackham’s Treasure, when Professor Calculus unknowingly activates a Murphy bed while Thompson and Thomson are sitting on it.

In the popular PC video games The Sims 2 and The Sims 3, Murphy beds have the potential to kill playable characters, an allusion to the hazards of pulling them down.



Pantry on the right, Wayne who made the Murphy Bed in the center and the Murphy Bed on the left on the day Wayne delivered it.  Wayne owns The Master’s Craftsman.  We decided on a Murphy Bed to make the ground floor look a little less like a bedroom and to give us more floor space when it is folded up.  I am really tickled that I found Wayne on Craig’s List and that he was willing and able to do the work.  And that he listened, understood what I wanted and did it.  Many times when you are a small woman your ideas or desires can be ignored or poo pooed by workmen.  Wayne did not do that at all!


It took a while, but I got it painted.  Found a cabinet that fits between the two and now holds cook books.

Wayne was excited about   using an existing cabinet to make a bed.  Normally he makes these beds from scratch with woods that the client picks.  He is a true craftsman.  Notice how he carefully kept the original handle and lock and key.  Inside, he reused the wood from the shelves to make the head board and the frame to attach the bed to.  I like the original wood and choose not to paint it.


After a few nights of sleeping in it I realized I could have stars!  So when Wayne was back a few days later to deliver our table (more about the table in another post) he drilled the holes that I wanted in the top.


Can you see the Big Dipper?  They twinkle too.  Sooo cool!

DSCF3009 (1)

Today I put on my shark sheets.  (Southern Tide brand at Belks.  Very soft and a great shade of blue).  So I’m sleeping under the stars with the sharks and tickled pink!

Leave a comment »

Getting Ready for Fall

Well I finally got my bed.  I had a Murphy bed made out of one of the old school book cabinets that my parents had.  There were 4 and I kept all of them.  Somehow, years ago, I knew I would need good storage.  Two are painted white and are upstairs crammed full (mostly of things that came from my parents’ house) and two are down, one is my pantry, the other now a Murphy bed.  I am very pleased with it.  More about that later



Wayne, the bed maker from The Master’s Craftsman click here if you want to see his site

In between the two cabinets I found a kitchen cabinet at Restore (the Habitat for Humanity outlet) that holds cookbooks.  Today I have been painting (as my father would say) a hunk of wood, faux stone, to be the counter top for it.  I certainly channeled my inner Richard for that.  Tuesday the 31st , Wayne will bring back my island base and a table top for it.  Finally!  I will be almost ready to declare the downstairs more or less finished.  We can have folks over for dinner!  What fun!


But of course the ice maker remains but a dream.  It worked for 2 weeks and then started over flowing, making an iceberg.  After a few weeks the distributor replaced the fridge.  That icemaker worked for 3 maybe 4 weeks and then started doing the same thing.  That was July.  Various fixes have been offered including a full refund, replacement of the same again, or a different fridge (stuck out 4” more) or wait to see if manufacture can come up with a fix.  We have tried several fixes and are now waiting on a new different idea…..

Anyway the outstanding planter on the edge of the deck is a big success.  Remember this is what it looked like in the Spring when it was first planted


So nice and orderly

And now.  Before I begin  to move a few plants that just didn’t do well in the shade and the ones that need to be wintered over

DSCF3004 (1)

Finally I got the whole jungle thing going on.  Now if we could just get rid of the UGLY school buses.  But that is next year’s battle.   Our friends Jim and BK will be happy to know that I have pulled out the asparagus ferns and they are just waiting for them to come pick them up and take them to their winter home in their basement.  Just kidding!  Jim and BK were good friends to care for that fern for 10 years and keep it alive.  I divided in the spring and small bits of it will be wintering in Ben’s shower.

Still warm here and dry.  The HOA’s crack gardening staff spread grass seed on the day that one of the hurricanes was supposed to hit us.  It didn’t.  We got about 5 tablespoons of rain.  For 2 weeks I watered the grass seed.  But the gardening staff kept coming back mowing and raking leaves and blowing them away.  And all the grass seed too.  So I gave up.  We have a very bare patch on both sides of the walk to our door.  I found a grass seed patch package that has a papery mulch, seed and fertilizer.  I put that down, barricaded the area off to keep the crack gardening staff and their machines AWAY and we almost have grass.  I have also been working on taming the giant patch of cannas that was out front.  Found a nice clump of day lillies that had been over whelmed by the cannas.  And I have some daffodil bulbs to be planted.  So we are busy busy here.


1 Comment »